Safety
4 min read
·
Why breakers trip, and when to worry

Omar Haddad
Emergency lead

A tripped breaker is a safety device doing exactly what it should. The question is why it tripped.
The three usual causes
✓
Overload: too many things on one circuit at once
✓
Short circuit: a hot wire touching neutral or ground
✓
Ground fault: current leaking somewhere it should not
What you can try
Unplug the big loads on that circuit, then reset the breaker firmly to off and back on. If it holds, you had an overload and can spread the load out.
When to call
If the breaker trips again with nothing plugged in, smells hot, or will not reset, leave it off and call us. That points to a fault in the wiring.
What we check
We test the circuit, find where the fault sits and fix it, then label the breaker so you know what it feeds.
Share
X
Copy link


