Kitchens
5 min read
·
Induction ranges and your wiring: what changes

Maya Chen
Master electrician

Switching from gas to induction is mostly a wiring job. The range itself slides in, but the circuit behind it usually has to be new.
What the range needs
Most full-size induction ranges ask for a dedicated 240V circuit on a 40A or 50A breaker. A kitchen that cooked on gas usually has a 120V outlet behind the stove, which is not enough.
Check first
Look at the range's install sheet before you buy. The breaker size it lists is the one we have to fit.
What we change
✓
Run a new 240V circuit from the panel to the range
✓
Fit the right outlet or a hardwired connection
✓
Cap the old gas line safely, with a plumber where needed
Will the panel cope?
On a 200A panel with free slots, almost always. On an older 100A panel that already runs a dryer and AC, we run a load calculation first and tell you the result before quoting.
Share
X
Copy link


